Size-to-Fit Driveway Gates

Our sleek and sturdy tubular steel driveway gates were designed to be easily customized on-site to fit any driveway up to 14' wide! The system includes everything needed to assemble your gate to fit your driveway. Included are the 1 3/8” diameter (black) steel gate frame tubes and fittings, two 2 ½” diameter FS 40 support posts, and all the associated hardware (black coated) to hang your gate.

Our gates are easily assembled and come complete with all corner and horizontal connectors necessary to make the gate frame. First, the support posts are set in concrete at either end of the driveway. A measurement of the distance between the two support posts needs to be taken to properly size the gate components. A power drill will be needed for securing self-tapping screws (included) that permanently secure all the junctions. A section of our fence (not included) is then zip-tied across the assembled gate frame. The vinyl coated hinges and latches are then secured to the frame. The whole assembly process takes just a few minutes. The final step is to hang the gate from the two 2 ½” diameter support posts.

Each gate also comes with a "cross-bracing cable" that runs diagonally from one upper corner to the lower corner on the other side of the gate. This keeps the gate from sagging over time, and can easily be adjusted with the turnbuckle. All these components are also coated black so that they preserve the low visual impact of the gate.

14' Driveway Gate for 7.5' Fence

$629 + FREE Shipping