|
Posts
Heavy Duty Posts
 Posts are required in areas where
the spacing between trees exceeds twenty feet, or in locations
completely void of trees. Our Heavy Duty Posts, which are constructed
from 1 5/8" diameter galvanized steel pipe (black polyester coated)
are available to match every fence height we offer. These can
be spaced 15'-20' apart, and come with top caps that keep water
out.
Each post also includes a 30" insert (post sleeve) that is first
driven into the ground to make a receptacle for the post. (It is
best to create a pilot hole by driving a 1" steel bar into the
ground prior to driving  insert). Not only do our inserts eliminate
getting on a ladder or digging holes to drive posts into the ground,
but they also allow for creating temporary barriers that can be
easily taken down and then re-installed as necessary. A dimpled
stopping point located 22" down each insert keeps the pipe at the
proper height for the fencing.
| 1 - HD Post w/
Insert for 7.5 Fence |
$29.95 +
$3.95 shipping |
|
| 4-pack of HD Posts
w/ Inserts for 7.5 Fence |
$109 +
$19 shipping |
|
| 7-pack of HD Posts
w/ Inserts for 7.5 Fence |
$179 +
$29 shipping |
|
Garden Posts
 Available to match every fence height we offer, Garden Posts are
powder coated with a baked on black finish. They also have pre-drilled
holes for attaching the fencing. These posts have some flex to
them, so they are to be used for smaller garden enclosures where
vertical support is more important than the actual strength of
the post.
This product is ideal for small vegetable gardens,
and flowerbed areas. They are not recommended for perimeter fencing
support. No Driving Cap necessary.
| 9' Garden Posts
for 7.5' fence (5) |
$79 + $14
shipping |
|
| 7' Garden Posts
for 6' fence (5) |
$59 + $11
shipping |
|
| 6' Garden Posts
for 5' fence (5) |
$49 + $11
shipping |
|
Driving Cap
 A driving cap (an inexpensive
one-time purchase) is also required to properly drive the inserts
for the Heavy Duty Posts into the ground
| Driving Cap |
$19 + $4
shipping |
|
| Cap for Inserts |
$2 + $0.2
shipping |
|
| Post Insert |
$9.95 + $2.5
shipping |
|
Corner Brace Kit
 The Corner Brace Kit is used in conjunction
with our Heavy Duty Post or Corner/Gate Post to make a very sturdy,
internally supported corner. It is well suited as a corner support
for a large enclosure using our Nylon Tension Cable.
The brace kit consists of 2 - 9' long x 1 3/8" diameter (galvanized
and black-coated) braces that are buried 18" along side the fence
on the inside of the enclosed area. They then attach diagonally
part way up the post (not included) with a band and cup (included).
| Corner Post Bracing |
$45 +
$8 shipping |
|
Corner/Gate Posts
Our Corner/Gate Posts are an SS40 weight post used on larger
jobs that require cabling to add strength to braced corners and
gates. The wall of the pipe is twice as thick as the Heavy Duty
Post, making it very stable and rigid. Corner/Gate Posts use
the same sleeve (included) as our Heavy Duty Posts.
| 1 - SC 40 Post
w/ Insert for 7.5 |
$39.95 +
$3.95 shipping |
|
| 4-pack of SC 40
Posts w/ Inserts for 7.5 |
$149 + $29
shipping |
|
|
Copyright
© Benner's Gardens 2002 - 2007
